Filter
Top Products
3-8
Chapter3 Getting Started
the correct subnet mask has been entered press the [Enter] button to save the
setting.
♦ If the ‘4.Gateway’ menu is selected, the LCD panel will show the following
message and the user can enter a new gateway address.
The user can check if there is any gateway IP address currently saved on the LCD
panel. If the gateway IP address has not been set, the LCD panel will show
nothing. Use the dial buttons to enter the Gateway IP Address and the [*] button to
enter ‘.’. After the correct gateway IP address has been entered press the [Enter]
button to save the setting.
, If ‘2.DHCP’ is selected from the ‘1.Mode’ menu the ‘IP’, ’Netmask’, and ‘Gateway’
options, will not be displayed on the LCD panel.
* Input Def. Gateway
xxx.xxx.xxx.xxx