Filter
Top Products
3-2
Chapter3 Getting Started
Environment Setting Mode
When the ITP-5012L IP phone is installed for the first time or the system settings
are changed, the phone settings must be modified to match your data network
environmentt. If there is no current settings when booting the phone or if the
system is not correctly connected, the phone enters in the environment setting
mode so that the users can check and modify the setting status.
To enter the environment setting mode, press the [menu] button from the
navigation buttons as soon as the ITP-5012L IP phone is connected to the power
supply.
In the environment setting mode, the LCD panel shows the following messages:
At this time, the user can move to each menu item by using the navigation buttons
or [1]~[9] dial buttons of the ITP-5012L IP phone.
♦ Up/down navigation buttons: Used when moving upward/downward between
menu items .
♦ Left/right navigation buttons: If there is a sub menu, move to the sub menu
and if a menu is at the last line, that menu will be executed.
♦ [0]~[9] dial buttons: Can be used to select a menu by number
♦ [Enter] button: Used toenter a sub menu or to save and close the modifications
to the selected sub menu.
Setup (1/6)
1.Infomation
2.Network
3.Load & Upgrade
4.System
5.Server
6.Exit