Filter
Top Products
Installation
9
ONA WALL PLATE OR WALL
To mount the phone directly on a wall, you
need two screws (not supplied) with heads
that fit into the keyhole slots on the base.
Drill two holes 3
15
/16 inches apart. Thread a
screw into each hole, letting the heads
extend about
1
/8 inch.
1. Plug one end of the supplied modular
cord (short for a wall plate, long for
direct wall mounting) into the
TEL LINE
jack on the base’s bottom.
2. Plug the supplied AC adapter's barrel
plug into the
DC IN 9V jack.
3. Route the adapter and modular cords
through the base’s grooves.
4. Plug the adapter into a standard AC
outlet. And plug the modular cord’s
other end into a modular phone line
jack.
5. For a wall plate,
align the base’s
keyhole slots with
the wall plate
studs and slide the
base downward to
secure it.
For direct wall
mounting, align
the base’s
keyhole slots
with the
mounting
screws and slide
the base
downward to secure it.
TEL LINEDC IN 9V