Filter
Top Products
Installation
8
ONA DESK TOP
1. Plug one end of
the supplied long
modular cord into
the
TEL LINE jack
on the bottom of
the base.
2. Insert the supplied
AC adapter’s
barrel plug into the
DC IN 9V jack on
the bottom of the
base and route the
adapter’s cord
through the strain
relief slot on the base.
3. Plug the other end of the modular cord
into a modular phone line jack.
4. Plug the adapter into a standard AC
outlet.
INSTALLING THE CHARGING
CRADLE
You can power the cordless handset using
the supplied 9V, 210 mA AC adapter.
1. Insert the
supplied AC
adapter’s
barrel plug
into the
DC IN
9V
jack on the
back of the
charger.
2. Route the cord through the strain relief
slot and plug the adapter into a
standard AC outlet.
TEL
LINE DC IN 9V
CAUTION
You must use
a Class 2
power source
that supplies
9V DC and delivers at
least 350 mA (for the
base)/210 mA (for the
charger). Its center tip
must be set to positive
and its plug must fit the
phone’s DC IN 9V jack.
The supplied adapter
meets these
specifications. Using an
adapter that does not
meet these
specifications could
damage the phone or
the adapter.
!
DC IN 9V