Filter
Top Products
Operation
17
TONE DIALING SWITCH-OVER
Some telephone companies use equipment
that requires pulse dialing (sometimes
referred to as rotary dialing).
If you need to enter tone dialing digits, you
can switch over to tone dialing during the
call. For example, entering your bank
account number after you have called your
bank. Ô
Initially make your call with the pulse dialing
mode.Once your call connects, press
/
TONE/<
. Enter the desired number. These
digits will be sent as tone dialing. Once the
call ends, the tone mode is canceled and
pulse dialing mode resumes.
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your
handset too far from your base unit, noise
increases. If you pass the range limits of the
base unit, your call will terminate within one
minute.
SELECTING A DIFFERENT
CHANNEL
If you encounter interference while using
your phone, you can manually change the
phone´s channel for clear operation. This
function works only when the phone is in
use. Press
SELECT/CH. "
Scanning
"
appears on the display, indicating the phone
is changing to another channel.
Ô NOTES Ô
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number can
be stored in a memory
location. This is referred
to as Chain Dialing (See
“Chain Dialing” on
page 25.)