Memory Dialing
22
3. Press
MEM or SELECT/CH.
4. Press
MEM or SELECT/CH. The "
Store
Name
" screen appears and a cursor
flashes indicating that the display is
ready for the name to be entered.
If "
Edit Memory X X
" appears, the
selected memory location is already
stored. Then you must either edit the
entry in this location, delete the entry in
this location, or select "
Go Back
" to
choose another location.
5. To enter a name (up to 13 characters),
use the number keys.
• See “Steps for Entering Names and
Special Characters” on page 23.
• Use
#/> and /TONE/< to move the
cursor to the desired location.
• Use
DELETE/TRANS to delete
characters as needed.
• Press and hold
DELETE/TRANS to
delete all the characters.
• If a name is not required, go to step
6.
6. Press
MEM or SELECT/CH. "
Store
Number
" is displayed.
The cursor flashes indicating that the
display is ready for the number to be
entered.
7. Use the number keys to enter the
phone number.
• The phone number cannot exceed
20 digits.