Filter
Top Products
Caller ID
34
Select the phone number to be stored
from the Caller ID list by pressing
VOL/RING or VOL/RING key.
2. Press
MEM.
3. Press
VOL/RING or VOL/RING key
or enter a number (
0 - 9) to select the
memory location to be stored.
4. Press
SELECT/CH. Ô
You hear a confirmation tone, and the
number is stored in memory. The
display returns to the Caller ID list.
CHANGING THE DIGITAL
S
ECURITY CODE
In the rare situation that you suspect another
cordless telephone is using the same
security code, you can change the code.
1. Remove the handset from the cradle.
Press and hold
PAGE on the base.
2. While holding
PAGE, place the handset
in the main base and leave the handset
in the main base for more than three
seconds.
3. Remove the handset from the main base.
Then place the second handset in the
main base and wait for more than three
seconds. Do not hold
PAGE
this time.
4. Press the TALK/FLASH key on one
handset. Once you make sure "
Talk
"
appears on the display, press the END
key. Then, try with the second handset.
If each handset displays "
Talk
", a new
security code is set. Otherwise, return
to step 1 and try again.
Ô NOTE Ô
If a message has already
been stored in the selected
memory number location, a
confirmation screen is
displayed.
Press VOL/RING key to
select "
Yes
". Press
SELECT/CH to overwrite.
The display returns to the
Caller ID list.