Filter
Top Products
Installation
12
BEFORE USING, REGISTER
EXTRA HANDSET TO THE
M
AIN BASE UNIT
When the dual handsets are removed from
the packaging, the handset that is placed in
the main base unit first (to charge the
battery for 15-20 hours), will automatically
be registered to the main base unit. (It does
not matter which handset you choose to
place in the main base unit first.) Ô
You will also need to register the extra
handset by placing it on the main base. The
extra handset WILL NOT operate properly
until the registration has been completed.
Once the handset is registered, it is ready
for use.
Follow these simple steps to register:
1. First, install the battery packs in both
handsets. Place either handset in the
main base cradle, then place the extra
handset in the extra charging cradle.
Charge both handsets for 15-20 hours.
2. After fully charging both batteries,
remove the handset in the extra
charging cradle and place it on the
main base cradle. The LED light on the
main base will begin to flash, indicating
that the registration is taking place
between the extra handset and the
main base.
3. Wait for at least five seconds before
removing the handset from the main
base.
Congratulations, the registration has been
completed and your dual handset cordless
phone is ready for use!
Ô NOTES Ô
• When you charge the
handset, the Caller ID
summary screen and the
name of the handset,
HS1 appears.
If HS2 appears, you are
charging handset No.2.
• The smaller cradle is
simply an extracharging
device for either
handset.