Filter
Top Products
Caller ID
30
3. Press
SELECT/CH.
4. Press
VOL/RING key to move the
pointer to "
Yes
".
5. Press SELECT/CH or DELETE/TRANS.
You hear a confirmation tone. After
about two seconds, the handset returns
to the standby mode.
CALLER ID
You must subscribe to Caller ID service
to use this feature.
When the telephone rings, the Caller ID
feature allows you to view the caller´s name
and phone number on the display before
you answer the phone. The handset
displays the phone number of the incoming
call, the name, and time. Additionally, you
can dial the displayed number and store the
information for memory dialing. Make sure
you have turned on the Caller ID on Call
Waiting feature. (See “Change the Auto
Talk and CIDCW” on page 19.)
WHEN THE TELEPHONE RINGS
1. When the Caller ID message is
received, the display shows the caller´s
phone number along with the date and
time. The incoming call information is
stored in the Caller ID record. If the
Caller ID service includes the caller´s
name, the caller´s name appears on
the display (up to 15 letters). Ô
Ô NOTES Ô
• If you answer a call
before the Caller ID
message is received
(Example: before the
second ring), the Caller
ID message will not
appear.
• When the call is
received via a
telephone company that
does not offer Caller ID
service, the caller´s
phone number and
name do not appear.
(This includes
international calls.)
• When the call is
received via a private
branch exchange
(PBX), the caller´s
phone number and
name may not appear.
• Data errors appear as
"".