Filter
Top Products
Installation
13
WHEN TO RE-REGISTER
HANDSETS
1. You’ll need to re-register the extra
handset (follow steps “Before Using,
Register Extra Handset to the Main
Base Unit” on page 12) each time the
digital security code is changed. Refer
to “Changing the Digital Security Code”
on page 34 for details regarding the
Digital Security Code. Ô
2. When there is a power failure for more
than one hour (e.g. due to electrical
storm or if the unit is unplugged during
a move), both handsets will need to be
re-registered. To re-register, follow the
registration process on “Before Using,
Register Extra Handset to the Main
Base Unit” on page 12.
CALL TRANSFER FEATURE
Conveniently, your cordless phone allows
you to transfer outside calls from handset to
handset simply by pressing
DELETE/TRANS.
Conversations will not be interrupted; only
one handset at a time can talk with an
outside caller. The second handset cannot
go off hook to listen to conversations or
make an outgoing call while the other
handset is in use.
To transfer a call (to the second handset)
1. Press
DELETE/TRANS during a call.
The call will automatically be placed on
hold and the transfer tone sounds. Ô
2. When the other handset receives the
call, the transfer tone stops. To cancel
the transfer, press
DELETE/TRANS or
TALK/FLASH on the handset.
Ô NOTES Ô
When to Re-register
Handsets
• If the extra handset’s
battery becomes very
low, the handset must be
recharged for 15-20
hours and re-registered
to the main base unit.
• Make sure to return the
handsets to the cradles
after each phone call.
Call Transfer Feature
If you transfer the call and it
is not picked up after five
minutes, the call will be
disconnected.