Filter
Top Products
Operation
19
SETTING MENU OPTIONS
There are five setup options available. They
are Auto Talk, CIDCW (Caller ID on Call
Waiting), Area Code, Dial and Language.
Auto Talk allows you to answer the phone
without pressing TALK/FLASH.
If the phone rings when Auto Talk is On,
simply remove the handset from the cradle
and the phone automatically answers the
call. If the phone rings when Auto Talk is
Off, you must press
TALK/FLASH to answer
the call. Ô
Changing the Auto Talk and
CIDCW
1. When the phone is in the standby
mode, press and hold CID/MENU.
2. Use
VOL/RING or VOL/RING key to
move the pointer to the selection that
you would like to change. Press
SELECT/CH to toggle between "
On
" and
"
Off
" for Auto Talk and CIDCW.
3. Press
END and return the handset to
the base unit to complete the setting.
The handset returns to the standby
mode.
Entering Your Area Code
If you enter a three-digit area code number
in the Area Code option, your local area
code does not appear in Caller ID
messages. Do not program this option if
your calling area requires ten-digit dialing.
When reviewing Caller ID messages, you
will see only the local seven-digit number.
For calls received from outside your local
area code, you will see a full ten-digit
number.
Ô NOTES Ô
• The Cordless phone
features include Auto
Talk
and Auto Standby.
Auto Standby allows you
to hang up by simply
returning the handset to
the cradle.
• Auto Talk, Area Code
and Language settings
can be also changed
from handset 2. Only
three settings (
Auto
Talk
,
Area Code
and
Language
) appear on
the display. CIDCW On/
Off and Dial mode
setting can be changed
from handset 1. To
confirm which handset is
HS1, look at the display
indicating
HS1
or
HS2
when the handset is on
the cradle.