Filter
Top Products
Memory Dialing
21
• If you are not sure of your dialing
system, set for tone dialing. Make a
trial call.
If the call connects, leave the setting
as is, otherwise, set for pulse dialing.
• If your phone system requires pulse
dialing and you need to send the
DTMF tones for certain situations
during a call, you may “switch-over”
to tone dialing. (Refer to “Tone
Dialing Switch-over” on page 17.)
Setting the Language
1. When the phone is in the standby
mode, press and hold
CID/MENU.
2. Press
VOL/RING key to move the
pointer down to "
Language
".
3. Press
SELECT/CH to toggle between
"
Eng
"(English), "
Fr.
"(French) and
"
Esp
"(Spanish) for each setting. Ô
4. Press END or return the handset to the
base unit to complete the setting. The
handset returns to the standby mode.
MEMORY DIALING
STORING PHONE NUMBERS
AND
NAMES
Memory Dialing allows you to dial a number
using just a few key presses. Your cordless
telephone stores up to ten names/numbers
in the handset. Ô
1. Press
MEM, "
Select Memory
" is
displayed.
2. Press VOL/RING or VOL/RING key
or enter a number (
0 - 9) to select the
memory location where you would like
to store the number.
Ô NOTES Ô
Setting the Language
There are three languages
to choose from; English,
French and Spanish.
Storing Phone Numbers
and Names
In memory dialing
operation, you must press
a key within 30 seconds or
the phone will return to the
standby mode. If you
return the handset to the
cradle, the phone will
return to the standby mode
also.