Filter
Top Products
Memory Dialing
27
6. Press
MEM or SELECT/CH. The cursor
flashes indicating that the display is
ready for the number to be edited.
7. Use the number key,
/TONE/<, #/>,
REDIAL/PAUSE or DELETE/TRANS to
edit the phone number. The phone
number cannot exceed 20 digits. (See
“Storing Phone Numbers and Names”
on page 21.)
If you don’t want to change the phone
number, skip this step.
8. Press
MEM or SELECT/CH. If you
changed either name or phone number,
a confirmation display shows up. If it is
correct, press
VOL/RING key to
select "
Yes
" and press SELECT/CH.
You hear a confirmation tone. The
memory storage is complete.
For example, if you edit a name and
number into memory location number
01, the display shows "
Memory01
Stored
". After about two seconds,
Select Memory screen is displayed.
9. Press
END to return to the standby
mode.
ERASING A STORED NAME
AND
PHONE NUMBER
1. Press MEM, "
Select Memory
" is
displayed.
2. Press
VOL/RING or VOL/RING key
or enter a number (
0
-
9
) to select the
memory location you would like to
erase.
3. Press
MEM or SELECT/CH.