PYLE Audio 7505-BTSDCM PDAs & Smartphones User Manual


 
D-14 Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
Appendix D: Bar Codes Settings
Codabar
D.2.13 Codabar
Enabled
Set this parameter to on to enable “Codabar” or off to disable it.
Set Length L1 And Set Length L2
Lengths for “Codabar” can be set for Any length, Length within a range, One discrete length
or Two discrete lengths. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing
two selected lengths. Length within a range allows you to decode a code type within a spec-
ified range from 5 to 55.
CLSI Editing
When enabled, this parameter strips the start and stop characters
and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar
symbol.
NOTIS Editing
When enabled, this parameter strips the start and stop characters from decoded Codabar
symbol.
Length Restriction
Refer to “Length Restriction” on page D-8 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page D-9 for details.
D.2.14 MSI Plessey
Enabled
Set this parameter to on to enable “MSI Plessey”.
Note: Symbol length does not include start and stop characters.