Filter
Top Products
User Guide for the SoundPoint IP 670 Desktop Phone
3 - 6
To answer a call using the Hands-Free Speakerphone:
>>
Do one of the following:
— Press .
— With the handset on-hook, press (next to the
flashing green status indicator).
— Press the Answer soft key.
To answer a call using the headset:
>>
Press .
If Headset Memory Mode is activated, press or the
Answer soft key.
Answering When in Another Call
If you have an active call, and an incoming call arrives:
• Regardless of line configuration:
— You may hear a call waiting tone.
The line with the incoming call will display the incoming call icon.
— Press or the Hold soft key to put the original call on hold.
The incoming call will be displayed at the top of the call screen and the
phone will ring.
Press the Answer soft key or the flashing green line key to answer the
call.
• If your phone is configured for a single Line Key per phone line:
— The incoming call will be shown in the call list below the active call.
— Scroll down to the incoming call, and press the Answer soft key or the
line key to answer it.
• If your phone is configured for a multiple Line Key per phone line:
— The line key below the active call will flash green to signal the
incoming call.
To see information about the caller, hold down the flashing line key
for at least two seconds.
Note
If “Handsfree mode disabled” appears on the graphic display after you press the
speakerphone key
, your system administrator has disabled the speakerphone on
your phone.