Filter
Top Products
User Guide for the SoundPoint IP 670 Desktop Phone
2 - 6
To use Headset Memory Mode, you must enable, and then activate, Headset
Memory Mode. When Headset Memory Mode is activated, the Headset key
flashes.
To enable Headset Memory Mode:
1. Press .
2. Select Settings > Basic > Preferences > Headset > Headset Memory
3. Scroll to select Enabled, and then press the Select soft key.
4. Press to return to the idle screen.
Repeat steps 1 to 4 and select Disabled to turn Headset Memory Mode off.
To activate Headset Memory Mode:
>>
Press twice.
The flashing headset icon on the graphic display or a flashing headset key
indicates that the headset mode is activated. Pressing or the
Answer soft key to receive a call will now connect to your headset
automatically.
Selecting the Correct Headset for Electronic Hookswitch
This feature allows you to answer your phone from your headset if you are
using one.
For information on headsets that provide Polycom supported electronic hookswitch
features for placing, answering, and ending calls, refer to Technical Bulletin 37477
SoundPoint IP Family Headset Compatibility List, available from
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pu
b.html