Filter
Top Products
User Guide for the SoundPoint IP 670 Desktop Phone
5 - 2
Connecting the SoundPoint IP Color Expansion Module
This section describes how to attach the SoundPoint IP Color Expansion
Module to your SoundPoint IP 670 phone. You can attach up to three
SoundPoint IP Color Expansion Modules.
To connect a SoundPoint IP Color Expansion Module to your phone:
1. Remove the rubber plug from the SoundPoint IP 670 or the SoundPoint
IP Color Expansion Module.
2. Align the SoundPoint IP Color Expansion Module at the top of the groove
lines on the SoundPoint IP 670 phone and slide it downwards until it
clicks into position.
3. Connect the base stand by aligning the two protrusions on the stand to
the holes on the back of the Color Expansion Module and snap it into
place.
For each SoundPoint IP Color Expansion Module that you want to add, repeat
steps 1 to 3.
ABC
21
DEF
3
54
MNOJKLGHI
6
Menu
Messages
Do Not Disturb
s
ns
e
ABC
21
DEF
3
54
MNOJKLGHI
6
Menu
Messages
Do Not Disturb