Filter
Top Products
User Guide for the SoundPoint IP 670 Desktop Phone
2 - 8
6. Press to return to the idle screen.
Changing the Audible Ringer
The SoundPoint IP 670 phone can play the audible ringer of an incoming call
through any of its alerting destinations: the speaker, the handset, the headset
(if enabled), or the active destination.
To change the audible ringer:
1. Press .
2. Select Settings > Basic > Preferences > Audible Ringer.
3. Scroll to select the desired ring destination.
Choose Speaker, Handset, Headset, or Active as the alerting destination
for the audible ringer.
4. Press the Select soft key to change to the selected audible ringer.
5. Press to return to the idle screen.
Note
If you configure your SoundPoint IP 670 phone with a silent ring, press the flashing
Line key or the Answer soft key to answer the call. If your handset is off hook, the
call is routed to the handset. If your handset is on hook, the call is routed to the
speaker.
Note
If the Active destination is selected, the audible ringer is played through:
• The speaker, by default.
• The handset, if it is off-hook and the phone is idle.
• The headset, if it is connected and Headset Memory Mode is enabled (refer to
Enabling Headset Memory Mode on page 2-5).