Filter
Top Products
Sensaphone
®
Model 1108 User’s Manual
82
• At any time after a valid alarm is
determined, the alarm may be acknowl-
edged at the Model 1108’s installation
site, by pressing any key.
• When the Model 1108 dials out and the
call is answered via Touch-Tone
telephone, any alarm may be instantly
acknowledged by pressing “555.”
• If the alarm message repeats for the
number of programmed Voice Repeti-
tions, and “555” has not been entered,
the Model 1108 will say:
“Indicate that you have received warning
message.”
The Model 1108 waits 10 seconds for
the Touch-Tone code “555” to be
entered. If the code is entered within 10
seconds, it responds:
“Warning message received by telephone
number...(the Unit ID Number).”
The alarm is considered acknowledged
and the dialout concludes.
• If the Model 1108 does not receive the
Touch-Tone code within 10 seconds, it
recites the following and then hangs up:
“Dial telephone number (gives the Unit ID Number)
within...(the programmed Intercall Time.)”
The recipient of this message must call
the Model 1108 back within the period
programmed for Intercall Time, in order
to acknowledge the alarm. If Local
Voice Mute is off, the unit will beep at
the installation site while waiting for
this call.
• Callback: The Model 1108 waits 10
rings before answering to guard against
random acknowledgment. If an
answering device is connected to the
Local, On-site
Acknowledgment
Variable FactorsIV. The Alarm is Acknowledged
Tone or Pulse
Callback
Acknowledgment:
Within Intercall Time
Touch-Tone
Acknowledgment:
Normal Code 555
Touch-Tone
Acknowledgment:
Fast Code 555