Phonetics 1108 Telephone User Manual


 
Chapter 4: Communications Programming
33
7. Enter a telephone number or custom code number that
will identify the Model 1108 as the caller to your beeper
or pager. A code may consist of any number(s) you
designate. Many users find it convenient to use the
telephone number to which the Model 1108 is connected.
RECOGNITION
TIME
7
4
1
VOICE
REPS
2
8
0
ID NUMBER
POWER
9
INTERCALL
TIME
3
MAX CALLS
CALL
DELAY
CLOCK
LISTEN TIME
SOUND
TEMP LIMITS
5
CALIBRATE
6
8. A pound or asterisk may be required in some dialing
situations. If required, position the pound (#) or asterisk
(*) within the telephone number where required by
pressing SET (where the pound is located) or WHAT IS
(where the asterisk is located). The Model 1108 will beep
each time pound or asterisk is pressed. Enter any remain-
ing digits of the telephone number.
SET
#
OR
WHAT
IS
*
9. Press ENTER. The Model 1108 will say Enter.
ENTER
TONE
PM
4.5 Rings Until Answer
Rings Until Answer is the programmed number of times the
telephone rings before the Model 1108 will answer an incom-
ing call. This can be set from 1 to 15 rings. The default value is
4.
4.5.1 Programming Rings Until Answer
To program Rings Until Answer:
1. Press SET.