A SERVICE OF

logo

5.9.1 Programming Power Failure Recognition Time
1. Press SET.
2. Press RECOGNITION TIME.
3. Press POWER. The Model 1108 responds: “Enter minutes.”
4. Using the number keys, enter the number of minutes. The
Model 1108 will recite the digits as they are pressed.
5. Press ENTER. The Model 1108 responds: “Enter seconds.”
6. Using the number keys, enter the number of seconds. The
Model 1108 will recite the digits as they are pressed.
7. Press ENTER. The Model 1108 responds: “OK.”
Chapter 5: Alarm Programming
79