Filter
Top Products
Sensaphone
®
Model 1108 User’s Manual
40
4.9 Local Voice Mute
When the Model 1108 dials out to report an alarm, it also
audibly recites the alarm message at its installation site. The
Local Voice Mute command allows you to turn off the voice at
the Model 1108’s site during alarm dialouts and status call-ins.
This feature is used to prevent intruders or unauthorized
persons from hearing the alarm dial-out message or from
hearing the Status Report during an off-site call.
4.9.1 Enable/Disable Local Voice Mute
To enable/disable Local Voice Mute:
1. Press SENSOR ON/OFF.
SENSOR
ON/OFF
2. Press MUTE.
CODE
MUTE
The Model 1108 will say “On” to indicate that Local
Voice Mute is enabled, or“Off” to indicate that it is
disabled.
3. Repeat key sequence to switch between enabled or
disabled Local Voice Mute.
4.10 Voice Repetitions
The Voice Repetitions feature allows programming of the
number of times the alarm message is delivered per phone call
during alarm dial-out.
The maximum repetitions may be set to 10; the default is
3 repetitions.