Filter
Top Products
Chapter 5: Alarm Programming
59
3. Press the number (1 to 8) of the selected temperature
input to be calibrated.
RECOGNITION
TIME
7
4
1
VOICE
REPS
2
8
INTERCALL
TIME
3
MAX CALLS
CALL
DELAY
CLOCK
TEMP LIMITS
5
CALIBRATE
6
4. Enter the number required to offset the current tempera-
ture reading so a correct reading is obtained.
RECOGNITION
TIME
7
4
1
VOICE
REPS
2
8
0
ID NUMBER
POWER
9
INTERCALL
TIME
3
MAX CALLS
CALL
DELAY
CLOCK
LISTEN TIME
SOUND
TEMP LIMITS
5
CALIBRATE
6
• To program a positive offset number (up to +10
degrees), enter the number on the keypad. The Model
1108 recites the digits as they are pressed.
• To program a negative offset number (up to –10
degrees), first press PAUSE. The unit responds with a
“beep.” Next, enter the number on the keypad. The unit
recites the digits as they are pressed.
5. Press ENTER. The Model 1108 responds: “Enter.”
ENTER
TONE
PM
NOTE
If you find that your calibration offset exceeds
more than + 5 or – 5 degrees, other complicating
factors could be affecting normal operation of
the Model 1108. Call Phonetics for technical
assistance.