Filter
Top Products
65
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
You cannot store a
name and phone
number in memory.
• Programming is not possible when the
handset is off the cradle or the SP-PHONE/
HEADSET indicator lights.
•
Do not pause for over 60 seconds while storing
.
• Do not enter a phone number more than
22 digits long.
• When using the Dial Lock (p. 57) or Call
Restriction feature (p. 58), you cannot store a
phone number in the one-touch auto dial
buttons ([M1] to [M3]).
• If “Directory full” is displayed, erase
other stored items from the directory (p. 43).
While programming or
searching, the unit
starts to ring and
stops the program/
search.
• To answer the call, lift the handset or press
[SP-PHONE/HEADSET]. Start again from
the beginning after hanging up.
The unit does not
display the caller’s
name and/or phone
number.
• You need to subscribe to a Caller ID service.
• Other telephone equipment may be
interfering with your phone. Disconnect it and
try again.
• Other electrical appliances connected to the
same outlet may be interfering with the Caller
ID information.
• Telephone line noise may be interfering with
the Caller ID information. Consult your
telephone company.
• The caller requested not to send his/her
information. See page 29.
• If a call is being transferred to you, the caller
information will not be displayed.
The display exits the
Caller List.
• Do not pause for over 60 seconds while
searching.
You cannot redial by
pressing [REDIAL].
• If the last number dialed was more than
32 digits long, the number will not be redialed
correctly.
Problem Cause and Remedy