Filter
Top Products
Programmable Settings
20
Dialing Mode
If you have touch tone service, set to Tone. If rotary or pulse service is
used, set to Pulse. Your phone comes from the factory set to Tone.
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Dial setting” by pressing
[] or [].
3
Press [].
4
Press [] at “Set dial mode”.
• The current setting is displayed.
5
Select “Pulse” or “Tone” by pressing
[] or [].
6
Press [ENTER] (Save key).
• A beep sounds.
• To exit the programming mode, press
[EXIT].
• You can exit the programming mode any time by pressing [EXIT].
–––––––––––––––
Save M1,M2,M3
Save directory
▼
Change password
Dial setting
Line setting
▼
–––––––––––––––
Set dial mode
Set flash time
▼
▼
Dial mode
:Tone
ENTER=Save
▼