Filter
Top Products
47
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
To answer a page
The INTERCOM indicator light flashes quickly (for the Ringer tone or Voice
mode) and the paging extension is displayed. Depending on the ringer
pattern setting (p. 23), your unit will function as follows:
Ringer tone (1 to 8): The selected tone rings.
Voice mode: The paging party’s voice is heard through the
speaker after 2 short beeps.
Auto Answer mode: After 2 short beeps, the speakerphone turns on
automatically. You can then talk with the caller.
Lift the handset off the cradle or press
[SP-PHONE/HEADSET] or [INTERCOM] to
answer the page.
OR
If your unit is set to the Auto Answer mode, just
speak into the MIC.
• If the ringer volume is set to OFF for Intercom, your unit will not ring.
• If the ringer pattern of your unit is the Voice, Auto Answer or Room Monitor mode,
the unit will not ring.
To answer an intercom call directed to another extension
If the paged extension user is not available, you can answer the page with
your extension.
Press [INTERCOM], and press [PAGE].
• If the paged extension is in the Auto Answer mode or the Room Monitor mode,
you cannot answer that page.
What the INTERCOM indicator means
Off Intercom is free.
On You are using the intercom.
Flashing twice
every 2 seconds
Other extension(s) is(are) using the intercom.
Flashing You place the intercom call on hold.
Flashing quickly An intercom call is being received.
Ex. EXT. 2 calling
Intercom
Call from[2]