Filter
Top Products
44
Storing Names and Numbers
You can store up to 3 names and phone numbers in the one-touch auto dial
buttons.
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Press [] at “Save M1,M2,M3”.
3
Enter a name, up to 15 characters with
the dialing buttons ([0] to [9]) (p. 39).
• To move the cursor, press [] or [].
• If a name is not required, press []
(Next key) and go to step 5.
4
Press [] (Next key).
5
Enter a phone number up to 22 digits.
• Each time you press [CLEAR], a digit is
erased. To erase all of the digits, press
and hold [CLEAR].
6
Press [] (Next key).
• If you want to change the name or
number, press [] to reach the desired
display and change it.
7
Press one of the one-touch auto dial
buttons ([M1], [M2] or [M3]).
• A beep sounds.
• To continue storing an item to another one-
touch auto dial button, repeat from step 2.
• To exit the programming mode, press
[EXIT].
Do not press any one-touch auto dial buttons before storing to prevent
misoperation.
–––––––––––––––
Save M1,M2,M3
Save directory
▼
Enter name
=Next
▼
▼
▼
Enter name
John White
=Next
▼
▼
▼
▼
Enter phone no.
2345678901
=Next
▼
▼
John White
234-567-8901
M1,M2,M3=Save
John White
234-567-8901
One - Touch Dialer