Filter
Top Products
Programmable Settings
22
Ringer Volume
You can select the ringer volume for each external line and the intercom
line individually. Set to HIGH, LOW, or OFF. If set to OFF for Line 1 and/or
Line 2, the unit will not ring for the line(s). If the ringer for the intercom line
is OFF, the unit will not ring for intercom calls. Your phone comes from the
factory set to HIGH.
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Ringer setting” by
pressing [] or [].
3
Press [].
4
Press [] at “Ringer volume”.
5
Select each ringer volume:
(1) Select “L1”, “L2” or
“Intercom” by pressing [] or
[].
(2) Select the desired volume by
pressing [] or [].
• Each time you press [] or [],
the volume will change and ring.
• To turn the ringer OFF, press
[] repeatedly until “Ringer
off” is displayed.
6
Press [ENTER] (Save key).
• A beep sounds.
• To exit the programming mode, press
[EXIT].
To turn the ringer ON:
Repeat steps 1 to 4, and select “L1”, “L2” or “Intercom”.
Press [], and press [ENTER] (Save key).
• The ringer will sound at the LOW level for the line.
–––––––––––––––
Save M1,M2,M3
Save directory
▼
LCD contrast
Ringer setting
Change password
▼
–––––––––––––––
Ringer volume
Ringer pattern
▼
▼▼
Ringer volume
L1 L2 Intercom
Low
■ ■ ■
High
Ringer volume
L1 L2 Intercom
Low
■ ■ ■ ■ ■ ■
High
Ringer volume
L1 L2 Intercom
Ringer off
LOW
HIGH
OFF
Ex. Line 1 is selected.
▼
▼