Filter
Top Products
Installation
10
Connecting the Handset and AC Adaptor
• USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G).
• Use only a Panasonic Handset for the KX-TS3282B/KX-TS3282W.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• After you connect the AC adaptor;
—the display shows “Set clock” (p. 15) for 60 seconds, and
—all of the extension indicators flash until you assign the extension number of
your unit (p. 17). Even if you do not use the intercom, assign the number.
Otherwise all of the extension indicators will continue flashing.
If you plug the AC adaptor into the power outlet without installing batteries, “”
flashes. After you install the batteries (p. 9),
“” disappears.
During a power failure, the batteries serve as the power source (p. 9). The unit
will work as a standard telephone. You can make or answer an external call with
the handset. (You cannot use the intercom.)
Handset
Handset Cord
Power Outlet
(AC 120V, 60Hz)
AC Adaptor
Hook
Handset Cord
Handset
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
Remove the wall mounting adaptor (see page
62, step 2), then fasten the AC adaptor cord to
prevent it from being disconnected. Attach the
wall mounting adaptor again.
LINE2/DATA LINE1/2
After completing all the
connections (p. 10-14),
plug the AC adaptor into
the power outlet.