Filter
Top Products
57
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Dial Lock
Except for the numbers stored in the one-touch auto dial buttons (p. 44),
you can prevent others from making a call to any number. Only incoming
calls are accepted until the dial lock is canceled.
To set the dial lock
1
Press [DIAL LOCK].
• “ ” flashes on the display.
2
Enter the password (p. 56).
3
Press [ENTER] (Save key).
• A beep sounds and “ ” stops flashing
and remains on the display.
• If 3 beeps are heard, you entered a wrong
password. Enter the correct one.
• You can exit the programming mode any time by pressing [EXIT].
• While the dialing buttons are locked, you cannot store phone numbers in the
memory of one-touch auto dial buttons.
To cancel the dial lock
Repeat steps 1 to 3 above.
• “ ” will disappear on the display.
Before using this feature, we recommend storing emergency numbers in the
memory of one-touch auto dial buttons (p. 44). Even if the dialing buttons are
locked, the numbers stored in these buttons can be dialed.
“ ” is displayed when the mode is on.
If the dial buttons are pressed after lifting the handset or pressing
[SP-PHONE/HEADSET] or a line button, “DIAL LOCKED” will be displayed for a
few seconds.
Enter password
:----
ENTER=Save
Enter password
:oooo
ENTER=Save