Filter
Top Products
Special Features
60
Call Privacy Feature
The Call Privacy feature allows you to prevent other extensions from joining
your conversation with an outside party. If you allow other extensions to join
your conversation (Call Barge In feature), select “Accept”.
Your phone comes from the factory set to “Reject”.
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Line setting” by pressing
[] or [].
3
Press [].
4
Scroll to “Call barge in” by pressing
[] or [].
5
Press [].
• The current setting is displayed.
6
Select “Accept” or “Reject” by
pressing [] or [].
7
Press [ENTER] (Save key).
• A beep sounds.
• To exit the programming mode, press
[EXIT].
• You can exit the programming mode any time by pressing [EXIT].
To join a conversation (Call Barge In)
If your unit is set to “Accept”, other extensions can join your conversation
with an outside party. The other extension users can press the relevant line
button to join you.
• The intercom feature may not work when more than three extensions join another
extension’s conversation.
• You cannot join a conversation between the other extensions and an outside party
unless all conversing extensions are set to “Accept”. When you tried to join the
conversation, “Busy” is displayed.
–––––––––––––––
Save M1,M2,M3
Save directory
▼
Dial setting
Line setting
Caller ID edit
▼
–––––––––––––––
Line selection
Call barge in
▼
▼
Line selection
Call barge in
–––––––––––––––
▼
Call barge in
:Reject
ENTER=Save
▼