Filter
Top Products
Special Features
58
Call Restriction
You can prevent the unit from dialing phone numbers beginning with
specified digit(s) (1 digit or 2 digits). Except for the numbers stored in the
memory of one-touch auto dial buttons (p. 44), phone numbers with the
restricted leading digits cannot be dialed out.
To set the call restriction
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Dial setting” by pressing
[] or [].
3
Press [].
4
Scroll to “Call restrict” by pressing
[] or [].
5
Press [].
If you changed the password from
“1111” (factory preset) to another
one, “Enter password” is displayed.
Enter the password (p. 56), and press
[] (Next key).
• If 3 beeps are heard, you entered a wrong
password. Enter the correct one.
Before using this feature, we recommend storing emergency numbers in the
memory of one-touch auto dial buttons (p. 44). Even if the phone numbers are
restricted, the numbers stored in these buttons can be dialed.
–––––––––––––––
Save M1,M2,M3
Save directory
▼
Change password
Dial setting
Line setting
▼
–––––––––––––––
Set dial mode
Set flash time
▼
▼
Set flash time
Call restrict
–––––––––––––––
▼
Restrict no.
:--
ENTER=Save
▼
Enter password
:----
=Next
Enter password
:oooo
=Next