Filter
Top Products
53
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press [RR
RR
] (TONE) before entering access numbers which require tone
dialing.
• The dialing mode changes to tone. You can enter numbers to access an answering service,
electronic banking service, etc. When you hang up, the mode will return to pulse.
FLASH Button
Pressing [FLASH] allows you to use special features of your host PBX
such as transferring an extension call or accessing special telephone
services (optional) such as call waiting.
• Pressing [FLASH] causes to disable the Temporary Tone Dialing mode or the mute (p. 52).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You can
select the following flash times: “80, 90, 100, 110, 200, 250, 300, 400, 600,
700 ms (milliseconds)”. Your phone comes from the factory set to “600 ms”.
Make sure that the handset is on the cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to “Dial setting” by pressing
[] or [], and press [].
3
Scroll to “Set flash time” by pressing
[] or [].
4
Press [].
• The current settings are displayed.
5
Select the desired time by pressing []
or [] for each line.
To move to the other line, press [] or [].
6
Press [ENTER].
• A beep sounds.
• To exit the programming mode, press [EXIT].
• You can exit the programming mode any time by pressing [EXIT].
• If the unit is connected via a PBX, PBX functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for the correct setting.
–––––––––––––––
Save M1,M2,M3
Save directory
▼
Change password
Dial setting
Line setting
▼
▼
Set dial mode
Set flash time
Call restrict
▼
Flash time
Line1 Line2
600ms 600ms
▼
▼
▼