Filter
Top Products
Mounting on Concrete or Mortar Wall
CAUTION
When driving the mounting screws into the wall, be careful to avoid touching any metalwork (metal/wire
laths, etc.), conduits, or electrical cables buried in the wall.
1. Place the AC adaptor wall mounting template (found later in this section) on the wall to mark the locations
where the 2 screws need to be placed.
KX-TVA50 KX-TVA200
83 mm
(3-1/4 in.)
110 mm
(4-5/16 in.)
2. Install 2 anchor plugs (user-supplied) in the wall.
Hammer
29 mm
(1-1/8 in.)
Anchor Plug
6.4 mm
(1/4 in.)
3. Install the screws (included) in the wall.
Drive the screw
to this position.
80 Installation Manual Document Version 3.0 2010/06
2.15.2 Wall Mounting the AC Adaptor