Filter
Top Products
2. Enter the Mailbox No. Length (2–5 digits), System Manager’s Mailbox No. and Message Manager’s
Mailbox No..
3. Click OK.
4. Click OK to close all lines and continue with initialization.
5. Click OK when system initialization is complete.
Initializing the VPS with the Mode Switch
1. Disconnect the port cables from the VPS.
2. Turn the power switch off at the VPS.
3. Set the Mode Switch to position 5 (see 2.3 Names and Locations).
0
1
1234
4. Turn the power switch back on at the VPS.
5. Connect the port cables.
6. Confirm that the RUN indicator blinks 5 times.
7. Turn the power switch off at the VPS.
Document Version 3.0 2010/06 Installation Manual 193
8.1 Initializing the VPS