Filter
Top Products
b. Verify the Operating and Maintenance version being used.
Sample display:
Connect DSHS: KX-TD1232
ROM Version: [---P231UxxxxxB] CAN
DB data (PC): Empty
Version: 4.03A5 [0008301332] MUK
Note
• If you have an older version of the maintenance tool but have the correct ROM version in the
PBX, you may still program the KX-TD1232 but you must program using the Manager’s
Extension.
c. Verify the ROM version of the KX-TD1232.
Example: P231U60403XX
The underlined digits represent the software production date code (year, month, day).
For DPT Integration, the production date must be 60403 or later.
If the software version of the PBX is lower than this, you may not be able to utilize some of the
features available only with DPT Integration. For more information, consult your dealer.
2. Go to the Main Menu. Select System Data Programming (BATCH [1] or INTERACTIVE [2]).
3. Select System from the System Data Programming Main Menu.
4. Select Voice Mail Integration from the System Menu.
5. First, enter the port numbers that will be connected to the VPS. If desired, change the default extension
numbers of the Voice Mail ports.
6. Step 6 should only be completed if the VPS is going to answer all incoming trunk (CO line) calls
directly.
Return to the System Data Programming Main Menu. Select Line and then select CO Line Setting 1
or CO Line Setting 2. Program all lines DIL to the first extension of the Voice Mail hunt group.
7. Continue from step 5 of 4.4.1 KX-TD Series PBX Programming via the Manager’s Extension.
114 Installation Manual Document Version 3.0 2010/06
4.4.2 KX-TD1232 Series PBX Programming via the Operating and Maintenance Tool