Filter
Top Products
7.3 KX-TD500 Programming for VPS Features
7.3.1 Live Call Screening Assignment via PC Programming
KX-TD500 users can program Live Call Screening features via PC programming. Follow the procedure below
to assign each feature.
1. Go to the 4-2 Extension Line screen.
2. Select the Card No. and Port No. which you are going to program.
3. In LCS Setting:
1. To set the LCS Password, enter a 3-digit number (using 0–9) in LCS Password.
Note
• To cancel the password, erase the 3-digit number
2. To assign LCS Recording Mode, set Recording Mode to Keep Rec or Stop Rec.
3. To assign LCS Private/Hands-free Mode, set Operation Mode to Private or Hands-free.
4. To activate the LCS status, set Status to Active.
Note
• To utilize the Live Call Screening features, it is necessary to first assign the LCS Password and
LCS Button (see 7.3.2 Button Assignment via PC Programming), and then activate the LCS
status.
4. Click Apply.
5. Repeat steps 2 to 4 for each extension.
Document Version 3.0 2010/06 Installation Manual 187
7.3.1 Live Call Screening Assignment via PC Programming