Filter
Top Products
7.3.2 Button Assignment via PC Programming
KX-TD500 users can assign buttons via PC programming. Follow the procedure below to assign each button.
1. Go to the 4-2 Extension Line screen.
2. Select the Card No. and Port No. which you are going to program.
3. Click CO Key in the upper right corner. The Flexible CO Key screen (for all CO keys) is displayed.
4.
Click the button corresponding to the CO key you want to program.
The Flexible CO Key screen is displayed.
188 Installation Manual Document Version 3.0 2010/06
7.3.2 Button Assignment via PC Programming