Filter
Top Products
5.4 KX-TA824 PBX Programming for Inband
Integration
The instructions in this section are for programming a KX-TA824 via the Operating and Maintenance Tool. To
program a KX-TA824 using the Manager Extension, follow the instructions for KX-TA series PBX programming
by referring to 5.7 KX-TA Series PBX Programming for Inband Integration.
1. Go to the 1.System - 2.Main screen.
2. Under Voice Mail, select DTMF Integration, then select each extension jack that is connected to the VPS.
Click Apply to save the changed data.
3. Go to the 2.Extension - 6.Extension Group screen.
4. Put all extensions connected to the VPS into the same extension group.
Reserve this extension group for these extensions! Do not mix other extensions into this group.
144 Installation Manual Document Version 3.0 2010/06
5.4 KX-TA824 PBX Programming for Inband Integration