Intercom
I
ntercom calls can be made between a
handset and the base unit.
Note:
R When paging a unit, the paged unit beeps
for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones.
– To answer the call with the handset,
press MOFFN, then press M
N.
–
To answer the call with the base unit,
press MZN 2 times.
Making an intercom call
Handset
1 MM
ENUN a MbN: “Intercom” a
MSELECTN
2 MSELECTN
R To stop paging, press MOFFN.
3 When you finish talking, press MOFFN.
Note:
R In step 1, the following soft key is also
available to make an intercom call.
When a cellular phone is paired:
MMENUN a MINTN
*1
When a cellular phone is not paired:
MINTN
*1
*1 If there is a new message in the voice
mail or answering system, MINTN is not
displayed.
Base unit
1 P
ress MINTERCOMN.
R To stop paging, press MINTERCOMN.
2 When you finish talking, press
MINTERCOMN.
Answering an intercom call
Handset
1 P
ress M
N to answer the page.
2 When you finish talking, press MOFFN.
Base unit
1 P
ress MINTERCOMN to answer the page.
2 When you finish talking, press
MINTERCOMN.
Handset locator
Y
ou can locate a misplaced handset by
paging it.
1 Base unit: Press MLOCATORN.
R The registered handset beeps for 1
minute.
2 To stop paging:
Base unit:
Press MLOCATORN.
Handset:
Press M
N,
then press MOFFN.
Transferring calls,
c
onference calls
Outside calls can be transferred or a
conference call with an outside party can be
made between a handset and the base unit.
Handset
1 D
uring an outside call, press MMENUN to
put the call on hold.
2 MbN: “Intercom” a MSELECTN
3 MSELECTN
4 Wait for the paged party to answer.
R If the paged party does not answer,
press M
N
to return to the outside
call.
5 To complete the transfer:
Press MOFFN.
R The outside call is being routed to the
destination unit.
To establish a conference call:
MMENUN a MbN: “Conf.” a MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
56
Intercom/Locator
TG7841BX_UE(en)_0528_ver011.pdf 56 2013/05/28 18:56:49