Filter
Top Products
Initial settings
n
Direct command code:
Programmable settings can be accessed by
pressing MMENUN, #, and then the
corresponding code on the dial keypad
(page 31).
Example: Press MMENUN#101.
n Symbol meaning:
Example: MbN: “Off”
Press MCN or MDN to select the words in
quotations.
Date and time
I
mportant:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press MSELECTN, then
proceed to step 2.
Handset
1 MM
ENUN#101
2 Enter the current date, month, and year
by selecting 2 digits for each.
Example: 15 July, 2013
15 07 13
3 MOKN
4 Enter the current hour and minute
(24-hour clock format) by selecting 2
digits for each.
Example: 21:30
21 30
5 MSAVEN a MOFFN
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Dialing mode
I
f you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
Handset
1 MM
ENUN#120
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
13
Getting Started
TG7841BX_UE(en)_0528_ver011.pdf 13 2013/05/28 18:56:47