Filter
Top Products
*14 Generally, the line mode setting should not be changed. This setting automatically maintains
r
eceiver volume at the proper level depending on the current telephone line condition. Set
the line mode to “A” if telephone line condition is not good.
*15 This setting is available when a cellular phone is paired.
*16 This setting is available when a headset is paired.
Special programming
Alarm
A
n alarm sounds at the set time for 3 minutes
once or daily.
Important:
R Set the date and time beforehand
(page 13).
Handset
1 MM
ENUN#720
2 MbN: Select the desired alarm option. a
MSELECTN
“O
ff” Turns alarm off. Go to
step 6.
“O
nce” An alarm sounds once at
the set time.
“D
aily” An alarm sounds daily at
the set time. Go to step 4.
3 E
nter the desired date and month. a
MOKN
4 Set the desired time. a MOKN
5 MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
6 MSELECTN a MOFFN
R When the alarm is set,
is displayed.
N
ote:
R To stop the alarm, press MOFFN or place
the handset on the base unit.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Night mode
N
ight mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for each unit.
Important:
R Set the date and time beforehand
(page 13).
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
Handset
1 MM
ENUN#238
2 MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MOFFN to
exit.
3 Enter the desired hour and minute you
wish to start this feature. a MOKN
4 Enter the desired hour and minute you
wish to end this feature.
5 MSAVEN a MOFFN
R When the night mode is set,
is
d
isplayed.
Base unit
1 MM
ENUN#238
2 MbN: Select the desired setting. a
MSAVEN
R If you select “Off”, press MEXITN to
exit.
3 Enter the desired hour and minute you
wish to start this feature. a MOKN
38
Programming
TG7841BX_UE(en)_0528_ver011.pdf 38 2013/05/28 18:56:48