Filter
Top Products
4 MbN:
Select the desired entry.
5 To make a cellular/landline call, continue
from step 3 for handset or step 3 for base
unit, “Scrolling through all entries”,
page 28.
Editing entries
Handset
1 F
ind the desired entry (page 28).
2 MMENUN a MbN: “Edit” a MSELECTN
3 Edit the name if necessary (16 characters
max.; page 27). a MOKN
4 Edit the phone number if necessary (24
digits max.). a MOKN
5 MbN: Select the desired group (page 27).
a MSELECTN 2 times
6 MOFFN
Erasing entries
Erasing an entry
Handset
1 F
ind the desired entry (page 28).
2 MMENUN a MbN: “Erase” a MSELECTN
3 MbN: “Yes” a MSELECTN
4 MOFFN
Base unit
1 F
ind the desired entry (page 28).
2 MERASEN a MbN: “Yes” a MSELECTN
3 MEXITN
Erasing all entries in a group
Handset
1 MFN a MM
ENUN
2 MbN: “Erase all” a MSELECTN
3 MbN: Select the desired group. a
MSELECTN
4 MbN: “Yes” a MSELECTN
5 MbN:
“Yes” a MSELECTN
6 MOFFN
Base unit
1 M N a ME
RASEN
2 MbN: Select the desired group. a
MSELECTN
3 MbN: “Yes” a MSELECTN
4 MbN: “Yes” a MSELECTN
Chain dial
T
his feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
Handset / Base unit
1 P
roceed with the operation for your unit.
During an outside call:
Handset: MMENUN a MbN:
“Phonebook” a MSELECTN
Base unit: M
N
2 MbN:
Select the desired entry.
3 Press MCALLN to dial the number.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press MDN (Pause) to add
pauses after the number and PIN as
necessary (page 19).
R If you have rotary/pulse service, you need
to press * (TONE) before pressing
MMENUN on the handset or M
N
on the
base unit in step 1 to change the dialing
mode temporarily to tone. When adding
entries to the phonebook, we recommend
adding * (TONE) to the beginning of
phone numbers you wish to chain dial
(page 27).
29
Shared Phonebook
TG7841BX_UE(en)_0528_ver011.pdf 29 2013/05/28 18:56:48