Filter
Top Products
4 E
nter the desired hour and minute you
wish to end this feature.
5 MSAVEN a MEXITN
R When the night mode is set,
is
d
isplayed.
Changing the start and end time
Handset / Base unit
1 MM
ENUN#237
2 Continue from step 3 for handset or step
3 for base unit, “Turning night mode on/
off”, page 38.
Changing the handset name
T
he handset can be given a customized name
(“Bob”, “Kitchen”, etc.). This is useful when
you make intercom calls. You can also select
whether or not the handset name is displayed
in standby mode. The default setting is “No”.
If you select “Yes” without entering any
handset name, “Handset 1” is displayed.
Handset
1 MM
ENUN#104
2 Enter the desired name (max. 10
characters; see the character table,
page 27).
R If not required, go to step 3.
3 MSAVEN
4 MbN: Select the desired setting. a
MSELECTN 2 times
5 MOFFN
Call block (Caller ID subscribers
only)
This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 39).
– the unit receives a call without phone
number (“Blocking incoming calls without
phone number”, page 40).
When a call is received, the unit rings for a
s
hort time
*1
while the caller is being identified.
If the phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
“Off” (page 40).
Important:
R When the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
(page 42) with
after the call is
d
isconnected.
R You can program this setting using either
the base unit or the handset.
Storing unwanted callers
Y
ou can store up to 250 phone numbers in the
call block list.
Important:
R You must store the phone number with an
area code in the call block list.
n From the caller list:
Handset
1 MCN
CID
2 MbN: Select the entry to be blocked.
3 MMENUN
4 MbN: “Save CID” a MSELECTN
5 MbN: “Call block” a MSELECTN
6 MbN: “Yes” a MSELECTN
7 Edit the phone number if necessary (24
digits max.).
8 MSAVEN a MOFFN
Base unit
1 MC
IDN
2 MbN: Select the entry to be blocked.
3 MSAVEN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
39
Programming
TG7841BX_UE(en)_0528_ver011.pdf 39 2013/05/28 18:56:48