Filter
Top Products
Storing a number to the phonebook
P
hone numbers of up to 24 digits can be
stored in the phonebook.
n When a cellular phone is paired:
1 MEN REDIAL
2 MbN: Select the desired phone number.
a MMENUN
3 MbN: “Save” a MSELECTN
4 To store the name, continue from step
3, “Editing entries”, page 29.
n When a cellular phone is not paired:
1 MEN REDIAL
2 MbN: Select the desired phone number.
a MSAVEN
3 To store the name, continue from step
3, “Editing entries”, page 29.
Pause (for PBX/long distance service
u
sers)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 29).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 9 a MDN (Pause)
2 Dial the phone number. a M
N
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.
Answering calls
1 Lift the handset and press M N
or MZN
when the unit rings.
R To answer a cellular call, you can also
press MCELLN.
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
2 W
hen you finish talking, press MOFFN or
place the handset on the base unit.
Auto talk
Y
ou can answer calls simply by lifting the
handset off the base unit. You do not need to
press M
N. To turn this feature on, see
page 35.
Adjusting the handset ringer volume
n W
hile the handset is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
n Programming the volume beforehand:
1 To change the cellular line ringer
volume:
For CELL 1: MMENUN#6281
For CELL 2: MMENUN#6282
To change the landline ringer
volume:
MMENUN#160
2 MbN: Select the desired volume. a
MSAVEN
3 MOFFN
Temporary ringer off
W
hile the unit is ringing for a call, you can turn
the ringer off temporarily by pressing M
N.
Useful features during a
c
all
Hold
T
his feature allows you to put an outside call
on hold.
1 Press MMENUN during an outside call.
2 MbN: “Hold” a MSELECTN
3 To release hold on the cellular line:
Press MCELLN.
R The base unit user can take the call by
pressing MCELL 1N or MCELL 2N.
To release hold on the landline:
19
Making/Answering Calls Using the Handset
TG7841BX_UE(en)_0528_ver011.pdf 19 2013/05/28 18:56:47