Filter
Top Products
Answering calls
W
hen a landline call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received, the
CELL 1 or CELL 2 indicator and SP-PHONE
indicator flash rapidly.
1 Press MZN when the unit rings.
R You can also answer the cellular call
by pressing MCELL 1N or MCELL 2N.
2 Speak into the microphone.
3 When you finish talking, press MZN.
Adjusting the base unit ringer volume
n While the base unit is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
n Programming the volume beforehand:
1 To change the cellular line ringer
volume:
For CELL 1: MMENUN#6281
For CELL 2: MMENUN#6282
To change the landline ringer
volume:
MMENUN#160
2 MbN: Select the desired volume.
3 MSAVEN a MEXITN
Useful features during a
c
all
Hold
T
his feature allows you to put an outside call
on hold.
1 Press MHOLDN during an outside call.
2 To release hold on the cellular line:
Press MCELL 1N or MCELL 2N.
R A handset user can take the call:
MCELLN
*1
a MSELECTN
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make
c
ellular calls (page 17).
To release hold on the landline:
Press MZN.
R A handset user can take the call by
pressing M
N.
N
ote:
R While a landline call is on hold, the
SP-PHONE indicator flashes.
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call is
disconnected.
R If another phone is connected to the same
line, you can also take the landline call by
lifting its handset.
Mute
W
hile mute is turned on, you can hear the
other party, but the other party cannot hear
you.
1 Press MMUTEN during conversation.
R The SP-PHONE indicator on the base
unit flashes.
2 To return to the conversation, press
MMUTEN again.
Flash for landline calls
MF
LASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 35.
For call waiting or Call Waiting
C
aller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
25
Making/Answering Calls Using the Base Unit
TG7841BX_UE(en)_0528_ver011.pdf 25 2013/05/28 18:56:47