Filter
Top Products
Useful InformationAnswering System
Preparation
55
Room Monitor
For assistance, please call: 1-800-211-PANA(7262)
Telephone System
To monitor with
The unit to be monitored must not be in use and the handset to be monitored
must be off the base unit.
• The monitored user can stop being monitored by:
— on the handset, press [OFF] or place the handset on the base unit.
— on the base unit, press [LOCATOR/INTERCOM/TRANSFER] or
[SP-PHONE].
• “Room monitor” is also displayed on the monitored handset.
• While the base unit is monitoring or being monitored, the LOCATOR/INTERCOM/
TRANSFER indicator light flashes and the SP-PHONE indicator lights.
To monitor with
The handset to be monitored must not be in use and off the base unit.
• If the Room Monitor feature of the destination handset is off or the handset is on
the base unit, busy tones will sound.
1 Press [HOLD/INTERCOM], then press the soft key ( ).
2 To call the base unit, press [0].
To call another handset, press its extension
number ([1] to [4]).
• To monitor from the speaker, press [s]. If the
handset is placed on the base unit, monitoring
will be stopped. You can place the handset on
the charger and continue monitoring. To switch
back to the receiver, press
[C].
3 To end monitoring, press [OFF].
1 Press [LOCATOR/INTERCOM/TRANSFER], then press [MUTE].
• The LOCATOR/INTERCOM/TRANSFER indicator flashes.
2 To call the handset, press its extension number [1]
( ) to
[4]
()
.
3 To end monitoring, press [LOCATOR/INTERCOM/TRANSFER] or
[SP-PHONE].
• The indicator light goes out.
Handset
MONITOR
Press extension#
for room monitor
1-4=Handset
0=Base
Room monitor
00-00-05
D01
Base Unit
TG5240.fm Page 55 Wednesday, September 22, 2004 3:45 PM