Filter
Top Products
Preparing the Answering System
26
Recording Mode
Two recording modes are available. The factory preset is “Standard recording
(16 min)”, which provides more recording time (16 min) and standard sound quality.
“Enhanced recording (8 min)” provides less recording time (8 min) but clearer
sound quality.
Message Alert
You can select whether or not the
Ringer/Message Alert indicator
on the handset will
flash slowly when new messages have been recorded
(p. 64)
. The factory preset is OFF.
• The Ringer/Message Alert indicator will not flash for new messages while the
handset is in use.
• The Ringer/Message Alert indicator acts as a ringer indicator and as a message
alert indicator. This indicator will flash rapidly when a call is received whether this
feature is on or off.
• Battery operating time may be shortened when using this feature (p. 14).
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [d] or [B], then press the
soft key ( ).
3 Press the soft key ( ) at “Set answering”.
4 Scroll to “Recording mode” by pressing
[d] or [B], then press the soft key ( ).
5 Select the recording mode by pressing [d] or
[B].
• You can also select the recording mode by
pressing [1] (Standard) or [2] (Enhanced).
6 Press the soft key ( ), then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [d] or [B], then press the
soft key ( ).
3 Scroll to “Message alert” by pressing [d]
or [B], then press the soft key ( ).
4 Select “On” or “Off” by pressing [d] or [B].
5 Press the soft key ( ), then press [OFF].
Handset
SELECT
SELECT
SELECT
Recording mode
Recording mode
:Standard
recording 16min
SAVE
Handset
SELECT
SELECT
Message alert
Message alert
:Off
SAVE
TG5240.fm Page 26 Wednesday, September 22, 2004 3:45 PM