Filter
Top Products
Useful InformationAnswering SystemTelephone System
15
For assistance, please call: 1-800-211-PANA(7262)
Preparation
Programmable Settings
Programming Guidelines
The unit has several programmable functions which can be selected from the
function menu on the display (p. 16).
How to select a function item from the menu
• To go back to the previous menu, press the soft key ( ), or press the soft key
() while “---(Go back)----” is displayed. If you press this key in the
main menu, the unit will exit programming mode.
• After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
table on page 16.)
• You can exit programming mode at any time by pressing [OFF].
•
If you do not press any buttons for 60 seconds, the unit will exit programming mode.
• If the unit detects a problem, an error message will be displayed (p. 82–84) and/or
error beeps will sound.
Make sure the handset and base unit are not being used. The handset
must be operated near the base unit and while off the base unit.
1
Press
[MENU]
.
• The main menu is displayed (p. 16).
2 Scroll to the desired item by pressing [d] or [B].
3 Press the soft key ( ) to select the desired item.
4 If the item has a sub-menu, select the menu item (p. 16).
Repeat steps 2 and 3 until the desired item is displayed.
If the item has no sub-menu, go to step 5.
5 Select the desired setting by pressing [d] or
[B], then press the soft key ( ).
• A confirmation tone will be heard and the setting
will be saved.
6 Press
[OFF] to exit programming mode.
Handset
SAVE
SAVE
BACK
BACK
SAVE
[OFF] exits
programming.
Navigator key scrolls
through the menu.
[MENU] enters the
function menu.
The soft key works as
the or key.
The soft key works
as the key.
BACK
SAVE
SELECT
B
Ringer setting
d
BACK
PLAY
SELECT
SELECT
SAVE
d
B
BACK
PLAY
SAVE
BACK
SELECT
TG5240.fm Page 15 Wednesday, September 22, 2004 3:45 PM