Filter
Top Products
Useful InformationAnswering System
Preparation
49
For assistance, please call: 1-800-211-PANA(7262)
Telephone System
Intercom
Voice Paging
The base unit user can make a voice announcement that is heard through the
speakers of all handsets.
• When 4 handsets are registered to the base unit, and if one handset user is on
conversation using the Booster feature, 1 of the remaining 3 handsets will not
receive the voice announcement.
• Only the handset user who answers first can talk with the base unit user.
• To answer the page from the handsets, see “Answering Intercom Calls” on
page 48.
• If a handset is too close to the base unit, you may hear feedback while making the
voice announcement. Place the handset on the base unit or charger (for
KX-TG5243 or accessory handset users, p. 3) or press [OFF].
• It is not possible to specify which handset(s) will hear the voice announcement.
• The announcement is heard at the handset ringer volume (p. 20).
1 Press [LOCATOR/INTERCOM/TRANSFER].
• The LOCATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.
2 To make a voice announcement to all handsets, press [5]
()
.
• You will hear a ringback tone (two short beeps) and the SP-PHONE indicator
flashes.
3 When the SP-PHONE indicator stops flashing, speak into the MIC.
• All handset users will hear your voice through their speakers after beeps,
“Call from Base” will be displayed and the Ringer/Message Alert
indicator will flash rapidly on the handsets.
• The handset on the base unit will not be paged.
4 When finished, press [SP-PHONE] or [LOCATOR/INTERCOM/
TRANSFER].
OR
After one of the handsets answers, talk into the MIC.
To disconnect the intercom, press [SP-PHONE] or
[LOCATOR/INTERCOM/TRANSFER].
Base Unit
TG5240.fm Page 49 Wednesday, September 22, 2004 3:45 PM